泰克电流探头解决方案提供：
- 最广的 AC/DC 及仅 AC 电流探头系列
- 测量准确度从几 uA 到 2000 A
- 带宽高至 120 MHz
- 电流箝位灵敏度低至 1 mA
- 符合第三方安全认证的产品（UL、CSA、ETL）
- 提供裸线电压额定值的产品
- 与泰克示波器配合使用时自动读数和定标，因此无需将电压转换为电流或者手动设定标度
概述：
DS_FeaturesBenefitsContainer
The A600 Series current probes are specifically designed to support measurements with the TekMeter® or oscilloscope.
Features and benefits
-
A621
- AC – 5 Hz to 50 kHz
- 100 mA to 2000 A peak
- For DMMs and oscilloscopes
- Clamp on
-
A622
- AC/DC – 100 kHz
- 50 mA to 100 A peak
- For DMMs and oscilloscopes
Applications
- Motor drives
- Inverters
- Power supplies
- Avionics
A621 2000 Amp AC Current probe/BNC
This industrial-style clamp-on probe has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can be used on digital multimeters, TekMeter, and oscilloscopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
1 For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.
A622 100 Amp AC DC Current probe/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can also be used on digital multimeters, TekMeter, and oscilloscopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
Recommended products
TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020 1 , DMM4040 1 , and DMM4050 1 digital multimeters.
Specifications
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
| Characteristic | A621 | A622 |
|---|---|---|
| Frequency range | 5 Hz to 50 kHz | DC to 100 kHz |
| Maximum input current | 2000 A peak | 100 A peak |
| Output | 1 mV/A, 10 mV/A, 100 mV/A | 10 mV/A, 100 mV/A |
| Maximum conductor diameter | 54 mm (2.13 in.) | 11.8 mm (0.46 in.) |
| Termination | BNC 1 | BNC 1 |
| Maximum bare-wire voltage | 600 V (CAT III) | 600 V (CAT III) |
| Safety | UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 |
UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 Ordering informationA621 2000 A AC Current probe/BNC.A622 100 A AC/DC Current probe/BNC.Recommended accessories012-1450-xx Adapter, lead; discrete – MLD, 2, 18 AWG, dual insul, BNC, female X 4 mm dual insul; banana jack X dual insul plug, shield bananaOptionsService optionsOpt. R3 Repair Service 3 Years (including warranty)Opt. R5 Repair Service 5 Years (including warranty) |